Case:
* Unable to complete the process of flashing to 100%
* The relationship between a BlackBerry USB port and USB port the computer is always broken (always fails) when the last automatic reconnect
Solution:
* Turn off the Power Management options for the root USB hub on your computer
* Make sure your BlackBerry is connected directly to computer USB (USB on the motherboard) and not on a USB hub.
* Disconnect all other USB devices sprt box2flasher, modem, flash, cardreader .. etc, etc. ..
* Turn off antivirus or firewall programs running on your computer
* To process a USB cable try flashing his short reply, .. jgn too long.
Finishing:
* Prepare a distinguished full 100% Batre
* After step solutions do proceed with the flashing process .. sprt usual, stay in and try to use DM Loader, try to use the os firmware version of which was the lowest, .. jgn immediately shot to the high version.
How To disable Power Management for USB root hub on the computer, perform the following steps:
* Open Control Panel by clicking Start> Settings> Control Panel.
* In Control Panel, click System.
* Select the Hardware tab and click Device Manager.
* In the Device Manager -> Universal Serial Bus controllers.
* Right a.Klik USB Root Hub and select Properties.
* B.Pilih Power Management tab and uncheck
* Repeat step a. b. for other entries named USB Root Hub. (Turn off everything)
after BB finished his / success ...
return your computer's USB settings & more like the original.
Software_Hardware Blackberry Solution
5:19 AM |
Labels:
Blackberry